Equipment characteristics (With Auto Pallet Change)
1. Linear guide carriage type 15, 20, 25, 30, 35.
2. This machine has double-spindle, with two worktables of 350 (L) * 550 (W), and two rows of workpieces can be placed at the same time, which can be used for groove and chamfer grinding to increase production.

Equipment characteristics
1. The total length of the workpiece is 1050, and the grinding length of the groove can be 950
2. The machine can deal with broach groove or blade sharpening.

Equipment characteristics
1. Machine can grind the groove of flat-formed broach and door latch type ruler broach.

Equipment characteristics
1. With the human-machine interface, it can be used for small offset correction operations to respond to the deformation of the workpiece
2. There are 4 workstations in the grinding area, and each station is composed of a 20 kg robot arm, which can complete rough grinding and fine grinding within 120 seconds

Equipment characteristics
Optimized Structure
Precision Spindle Design
Turcite-B on Slideways

Equipment characteristics
1. Linear guide carriage type 15, 20, 25, 30, 35, 45, 55, 65
2. Machine with built-in spindle, adopting M22 screw fixed post grinding wheel, still sustain stable and reliable while in high-speed rotating processing.

Equipment characteristics
1. Linear guide carriage type 9, 12, 15, 20, 25, 30, 35
2. Machine with built-in spindle, adopting M22 screw fixed post grinding wheel, still sustain stable and reliable while in high-speed rotating processing.

Equipment characteristics
1. Linear guideway rail type 9, 12, 15, 20, 25, 30, 35, 45, 55, 65
2. The machine with overall high-rigidity structure design, combined with the X-axis cylinder to transport forth and back up to 30M per minute, can obtain the best production efficiency and accuracy.

Equipment characteristics (single electric disk type)
1. Linear guide carriage type 15, 20, 25, 30, 35
2. This machine has double-spindle, with a long worktable of 600 (L) * 550 (W), and two rows of workpieces can be placed at the same time, which can be used for groove and chamfer grinding to increase production.

Equipment characteristics
1. Stable left and right workbench
2. Flat grinding and molding grinding are easy to complete
3. High rigid structure design and automatic oil return equipment system
4. Humanized CNC control system

Equipment characteristics
1. The machine with dual spindle can grind inner and outer diameter of round workpiece. It is equipped with Mitsubishi E70 CNC controller, interactive screen operation.
2. Workpiece outer diameter grinding Ø2-->Ø100; inner diameter grinding Ø2-->Ø80

Equipment characteristics
1. Machine can grind the groove of the arc face broach. The maxium length of the workpiece is 1000 and the length of the grinding groove is 800. The maxium length of the round bar broach is 1800 mm and the length of the grinding groove is 1600 mm

Equipment characteristics
1. The maximum diameter of the workpiece is 160; the maximum grinding groove length is 1800 ( broach groove grinder)
2. According to the customer's processing flow, the operation screen can be customized.
3. The high-precision spindle with 8,000rpm can get high-quality processing.

Equipment characteristics
1. Machine can grind the groove of flat-formed broach and door latch type ruler broach.
2. The rapid dressing mechanism shortens the production time of the process and improves production efficiency

Equipment characteristics (With Auto Pallet Change)
1. Linear guide carriage type 15, 20, 25, 30, 35.
2. This machine has double-spindle, with two worktables of 350 (L) * 550 (W), and two rows of workpieces can be placed at the same time, which can be used for groove and chamfer grinding to increase production.